![background image](http://html.mh-extra.com/html/icom/ic-2300h/ic-2300h_instruction-manual_612020021.webp)
11
3
BASIC OPERATION
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
■
Selecting output power
The IC-2300H has 4* output power levels to suit your
operating requirements. Lower output powers during
short-distance communications may reduce the pos-
sibility of interference to other stations and will reduce
current consumption.
*The Taiwan version has only 3 output power level options.
➥
Push
[LOW]
several times to select the output pow-
er.
•
The output power can be changed even while
transmitting.
• OUTPUT POWER
(approximately)
USA, Export, China
Taiwan
Korea
High:
65 W
24 W
50 W
Mid:
25 W
10 W
25 W
Mid-Low:
10 W
–
10 W
Low:
5 W
5 W
5 W
Using the HM-133V
➥
Push
[HIGH]
for high output power;
[MID]
for mid-low output power (push again for mid output
power); and
[LOW]
for low output power.
•
When using the microphone, output power can be
changed only while receiving.
■
One-touch PTT function
The PTT switch can be operated as a one-touch PTT
switch (each push switches between transmit and re-
ceive). Using this function you can transmit without
holding down the PTT switch.
To prevent accidental continuous transmissions with
this function, the transceiver has a time-out timer. See
page 48 for details.
z
Push
[FUNC]
then
[PTT-M]
to turn ON the
One-Touch PTT function.
• The activity indicator lights green.
x
Push
[PTT]
to transmit and push again to receive.
•
Two beeps sound when transmit starts, and a long
beep sounds when returning to receive.
•
The “
$
” icon blinks while the One-Touch PTT
function is ON.
c
Push
[FUNC]
then
[PTT-M]
to turn OFF the
One-Touch PTT function.
• The activity indicator goes out.
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO
MUTE
NAR
MID
LOW
The selected output power is displayed here.
(If “High” is selected, no icon is displayed.)
Using the HM-133V