![background image](http://html.mh-extra.com/html/icom/ic-2300h/ic-2300h_instruction-manual_612020062.webp)
52
11
OTHER FUNCTIONS
■
Partial reset
If you want to reset the VFO frequency, VFO
settings and Set mode items to their default values,
without clearing the memory contents, you can do a
partial reset of the transceiver's CPU.
➥
While holding down
[V/MHz]
, hold down
[ ]
for 1 sec-
ond to turn ON the power.
• The CPU is partially reset.
■
All Reset
The function display may, at rare times, display errone-
ous information (for example when fi rst applying pow-
er). This may be externally caused by static electricity
or other factors.
In such case, fi rst turn OFF the power, wait a few sec-
onds, then turn ON the power again.
If the problem persists, perform the following proce-
dure.
IMPORTANT!:
All Rest CLEARS all memory contents and resets all
values in the CPU to default. A Partial Reset can also
be done that will not clear memory content, but may
not solve the problem.
q
Turn OFF the power, if the transceiver is ON.
w
While holding down
[SET]
and
[S.MW]
, hold down
[ ]
for 1 second to turn ON the power.
• The transceiver is totally reset.
[ ]
[SCAN]
(V/MHz)
[ ]
[MW]
(S.MW)
[LOCK]
(SET)