![background image](http://html.mh-extra.com/html/icom/ic-2300h/ic-2300h_instruction-manual_612020043.webp)
33
7
SCAN OPERATION
■
Scan Resume function
Various pause and timer options can be selected with
the Scan Resume function. The selected resume op-
tion is also used for Priority Watch. (p. 35)
q
Push
[SET]
to enter the Set mode.
w
Push
[SET]
or
[MONI]
until “SCT” or “SCP” ap-
pears.
e
Rotate
[DIAL]
to set the desired timer:
•
“SCP-2”–"SCP-20”
:
The scan pauses for 2 to
20 seconds, when a signal is
received.
•
“SCP-HO”
:
When a signal is received, the
scan pauses until it disappears.
•
“SCT-0”–"SCT-5” :
The scan pauses, then re-
sumes 0 to 5 seconds after
the signal disappears.
•
“SCT-HO”
:
The scan continues to pause,
even if the signal disappears.
r
Push any keys other than
[SET]
or
[MONI]
to exit
the Set mode.
Using the HM-133V
z
Push
[SET]
to enter the Set mode.
x
Push
[SET]
or
[ENT]
until “SCT” or “SCP”
appears.
c
Push
[
Y
]
or
[
Z
]
to select the scan resume option.
• See step
e
above for details.
v
Push
[CLR]
to exit the Set mode.
NOTE:
The Set mode cannot be accessed when
memory names are displayed. To set the scan re-
sume option, return to the frequency display by hold-
ing down
[MONI]
(ANM) on the front panel for 1 sec-
ond, or push
[FUNC]
then
[MONI]
(on the
HM-133V) to cancel the channel name display, and
then set the option as described on above.
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
When a signal is received, the
scan pauses until it disappears.
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
The scan will resume 5 seconds
after the signal disappears.