![background image](http://html.mh-extra.com/html/icom/ic-2300h/ic-2300h_instruction-manual_612020016.webp)
6
■
Tuning step selection
The tuning step is the smallest selectable frequency
increment you can set the operating frequency. The fol-
lowing tuning steps are selectable.
• 5 kHz
• 6.25 kHz
• 10 kHz
• 12.5 kHz
• 15 kHz
• 20 kHz
• 25 kHz
• 30 kHz
• 50 kHz
NOTE:
For convenience, select the tuning step that
matches the frequency intervals of the repeaters in
your area.
q
If necessary, push
[V/MH z]
to select the VFO mode.
w
Push
[SET]
to enter the Set mode.
e
Push
[SET]
or
[MONI]
several times, until “TS” ap-
pears, as shown to the right.
r
Rotate
[DIAL]
to select the desired tuning step.
t
Push any key, other than
[SET]
or
[MONI]
, to save
the entry and exit the Set mode.
Using the HM-133V
z
If necessary, push
[VFO]
to select the VFO
mode.
x
Push
[SET]
to enter the Set mode.
c
Push
[SET]
or
[ENT]
several times until “TS”
appears.
v
Push
[
Y
]
or
[
Z
]
to select the desired tuning step.
b
Push
[CLR]
to save the entry and exit the Set
mode.
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
15 kHz tuning step
2
SETTING A FREQUENCY