![background image](http://html.mh-extra.com/html/icom/ic-2300h/ic-2300h_instruction-manual_612020061.webp)
11
OTHER FUNCTIONS
51
■
Microphone keys
[F-1]
and
[F-2]
on the supplied HM-133V
memorize the transceiver settings.
The
[UP]
and
[DOWN]
keys on the standard or optional mi-
crophone (other than the HM-133V) can be assigned func-
tions like the function keys on the transceiver’s front panel.
[F-1] and [F-2] keys on HM-133V
D
The following functions can be assigned to the micro-
phone's
[F-1]
and
[F-2]
keys.
• Operating frequency
• Repeater settings
(offset direction and offset, tone ON/OFF and frequency)
• Tone/DTCS squelch
(ON/OFF, frequency/code and polarity)
• Transmit output power setting
• Setting the Set mode items
• Setting the Initial Set mode items (except “Display Type”)
➥
Programming the function
Select the desired function, and then hold down
[F-1]
or
[F-2]
for 1 second.
• 3 beeps sound.
To program the Set and Initial Set modes items,
push
[FUNC]
, and then hold down
[F-1]
or
[F-2]
for 1 second.
➥
Recalling the function
Push
[F-1]
or
[F-2]
.
To recall the Set and Initial Set modes items, push
[FUNC]
, and then
[F-1]
or
[F-2]
.
When turning ON the transceiver's power, the following
functions are pre-assigned to
[UP]
or
[DN]
on micro-
phones other than HM-133V.
[UP]
: Channel up; hold down for 1 second to start the
scan, push again to stop it.
[DN]
: Channel down; hold down for 1 second to start
the scan, push again to stop it.
➥
Assigning a function
z
Turn OFF the power.
x
While holding down the desired key on the transceiv-
er and either
[UP]
or
[DN]
keys on the microphone,
turn ON the power.
• The function is assigned to the key.
➥
Clearing an assignment
z
Turn OFF the power.
x
While holding down the desired
[UP]
or
[DN]
key on
the microphone, turn ON the power.
[UP] and [DN] keys on a microphones other than the HM-133V
D