Code 40103/202/3/5/10
Transformers
Designed to convert 230V power to 110V.
Ideal for powering equipment made for
use on building sites.
Operating & Safety Guide 620
620/04
©HSS Hire Service Group Plc 2003 No. 620/04
Group Office: 25 Willow Lane, Mitcham, Surrey CR4 4TS
Web Site: http://www.hss.com
...any comments?
If you have any suggestions to enable us to improve
the information within this guide please fax your
comments or write to the Product Manager at the
address below
Fax: 020 8687 5001
EQUIPMENT CARE
16A
32A
MCB
10kVA Site Transformer
32A Socket
16A
Socket
Never push the equipment beyond its design
limits.
If it will not do what you want with reasonable
ease and speed, assume you have the wrong tool for the
job. Contact your local HSS Hire Shop for advice.
Handle the equipment with care.
Avoid dropping it,
knocking it, or otherwise exposing it to damage.
Keep the equipment clean
- you will find this less of a
chore if you clean it regularly, rather than wait until the
end of the hire period.
When not in use
, store the equipment somewhere
clean, dry and safe
from thieves.
FINISHING OFF
Switch OFF and unplug all electrical equipment
connected to the transformer. Switch OFF the
power supply to the transformer, then unplug or, if
required, have a qualified electrician disconnect
the unit.
Give the unit a final clean up ready for return,
to
your local HSS Hire Shop.
