Using PC Cards
D O S
Starting PC Card Director for DOS
To start PC Card Director for DOS:
1
Go to the DOS command prompt.
C:\>
Note:
C:\THINKPAD is the directory where
PC Card Director is installed. If you
have installed it in a different
directory, type that directory name
instead.
2
Type
C:\>C:\THINKPAD\EZPLAY
at the command prompt;
then press Enter.
The following screen appears:
PC Card Director
(C) Copyright IBM Corp. 1993,1995, Version 3.
Card Services DOS Card Services Driver, Version 2.1 PCMCIA Card Services
Release
2.1
Revision
2.1
Slot Information
No.
Status
Card Type
Card Information
-> 1
Ready
Memory
F: IBM 1MB SRAM
933152
933151
Enter
F1=Help
F3=End
F9=Resources
F1 =Client
Note:
Some PC Cards might not display
any information in PC Card Director.
ATA Card Mount Utility
For more information:
Page 289.
PCMCIA ATA cards can have a number of partitions. The ATA
Card Mount utility assigns (mounts) or removes (dismounts) a drive
letter to these partitions.
C:\THINKPAD
is the directory where PC Card Director is installed. If
you have installed it in a different directory, type that directory name
instead.
Chapter 3. Operating Your Computer
67
Title: C78TFMST CreationDate: 07/11/95 14:33:57
