Advanced Information for PC Cards
For DOS and Windows:
DEVICE=[drive:] [directory] IBMDOSCS.SYS ← Card Services
DEVICE=[drive:] [directory] IBMDSCSE.SYS
↑ Enhanced Card Services
DEVICE=[drive:] [directory] FLSHDMTD.SYS
↑ Memory Technology driver
DEVICE=[drive:] [directory] PAWATASF.SYS
↑ ATA SRAM Flash card device driver
Checking the Allocated Resources for the PC Card
If the resources for the PC Cards are not correctly allocated, you will
see error messages. You can check which resources for the PC
Card were not correctly allocated by using PC Card Director. To
check the resources that could not be allocated, click on the Status
button in the PC Card Director program.
The following are some reasons why the resources could not be
correctly allocated, and corresponding actions you should take to
solve the problem.
The resource was already reserved by another device.
Resource Map Utility or other configuration files were not set up
correctly.
To change the resource settings for the PC Card or other devices,
you can do one of the following:
Refer to the system manual or utility program and check which
device is using the resources planned to be used by the PC
Card. Then, change the settings for the device by using, for
example, the setup programs. For more information, refer to the
manuals supplied with your computer.
If your PC Card is enabled by a PC Card enabler, you can
change the resources assigned for the PC Card by changing the
parameters in the PC Card enabler, or change the settings in the
configuration file of the PC Card. For more information, refer to
the manuals supplied with your PC Card.
Appendix B. Advanced Information for PC Cards
303
Title: C78TFMST CreationDate: 07/11/95 14:33:57
