Using Easy-Setup
Start
1
2
3
Start up is used to change the startup sequence of your computer.
3
4
HDD-3
HDD-4
PCMCIA
Note:
For more information about the
startup sequence, see “Using the
Selectable Drive-Startup Sequence”
on page 49.
The HDD-1 icon represents the internal hard disk drive installed in
the computer. The other numbered HDD icons are external hard
disk drives. FDD-1 represents the first diskette drive found during
system startup. When no diskette drive is installed and if an
attached expansion unit (Dock I or Dock II) has a diskette drive, the
diskette drive in Dock I or Dock II will be the first drive.
Test
Select Test to test the computer hardware.
Exit
Restart
Start
SystemBoard Memory Display HDD-1 FDD-1
Parallel
PCMCIA-1
1
1
1
PCMCIA-2
FDD-2
2
2
HDD-2
2
HDD-3
3
Serial
CD-ROM
DSP
Audio
Infrared
For more information, see “Testing the Computer” on page 255.
Note:
The FDD-1 and HDD-1 icons
represent the diskette drive and hard
disk drive of the computer,
respectively. The FDD-2 and HDD-3
icons represent the externally
attached diskette drive and hard disk
drives. The HDD-2 icon represents
the hard disk drive in the UltraBay.
Chapter 3. Operating Your Computer
47
Title: C78TFMST CreationDate: 07/11/95 14:33:57