Advanced Information for PC Cards
D O S
W I N
Registered Drivers and Standard Rules for
DOS and Windows
The following is a sample of the CONFIG.SYS file for DOS and
Windows:
:
DEVICE=C:\DOS\EMM386.EXE FRAME=D
X=C8
-CFFF
:
DEVICEHIGH=C:\THINKPAD\IBMDSS 1.SYS
←
Socket Services
DEVICEHIGH=C:\THINKPAD\IBMDOSCS.SYS
←
Card Services
DEVICEHIGH=C:\THINKPAD\IBMDSCSE.SYS
←
Enhanced
Card Services
DEVICEHIGH=C:\THINKPAD\DICRMU 1.SYS /MA=C8
-CFFF
↑ Resource Map Utility
DEVICEHIGH=C:\THINKPAD\$ICPMDOS.SYS
← Power Management
Support driver
:
REM PC_Card_Client_Device_Driver
:
DEVICEHIGH=C:\THINKPAD\xxxxxxx.SYS
←
Storage card
device driver
DEVICEHIGH=C:\THINKPAD\AUTODRV.SYS
← Auto Configurator
:
Rule 1
When using the PCMCIA drivers with the Software EMS
driver (EMM386.EXE), you must specify the
X=
parameter
for EMM386.EXE. This is to avoid conflict in the memory
area used by the PCMCIA drivers and the Software EMS
driver.
Rule 2
Socket Services, Card Services, and Resource Map Utility
must be listed in this order.
Rule 3
The Power Management Support driver must be listed
after the Resource Map Utility.
Rule 4
The PC Card Client device driver must be listed before
the Auto Configurator.
Rule 5
When using storage cards, you must install the device
driver according to the card type, as listed below.
Using only an ATA card:
296
IBM ThinkPad 760CD User's Guide
Title: C78TFMST CreationDate: 07/11/95 14:33:57
