IBM System storage DS6000 Series, Attachment Manual

Page: 199 / 298

Figure 81 shows the start lpfc auto-generated configuration.
Note: You will delete anything that you put within this auto-generated section if
you issue the pkgrm command to remove the lpfc driver package. You
might want to add additional lines to probe for additional LUNs or targets.
Delete any lines that represent lpfc targets or LUNs that are not used.
4. Type either:
name="sd" class="scsi"
target=0 lun=0;
name="sd" class="scsi"
target=0 lun=1;
name="sd" class="scsi"
target=0 lun=2;
name="sd" class="scsi"
target=0 lun=3;
name="sd" class="scsi"
target=0 lun=4;
name="sd" class="scsi"
target=0 lun=5;
name="sd" class="scsi"
target=0 lun=6;
name="sd" class="scsi"
target=0 lun=7;
name="sd" class="scsi"
target=0 lun=8;
name="sd" class="scsi"
target=0 lun=9;
name="sd" class="scsi"
target=0 lun=10;
.
.
.
name="sd" class="scsi"
target=0 lun=48;
name="sd" class="scsi"
target=0 lun=49;
Figure 80. Example of sd.conf file entries for fibre-channel
name="sd" parent="lpfc" target=0 lun=0;
name="sd" parent="lpfc" target=1 lun=0;
name="sd" parent="lpfc" target=2 lun=0;
name="sd" parent="lpfc" target=3 lun=0;
name="sd" parent="lpfc" target=4 lun=0;
name="sd" parent="lpfc" target=5 lun=0;
name="sd" parent="lpfc" target=6 lun=0;
name="sd" parent="lpfc" target=7 lun=0;
name="sd" parent="lpfc" target=8 lun=0;
name="sd" parent="lpfc" target=9 lun=0;
name="sd" parent="lpfc" target=10 lun=0;
name="sd" parent="lpfc" target=11 lun=0;
name="sd" parent="lpfc" target=12 lun=0;
name="sd" parent="lpfc" target=13 lun=0;
name="sd" parent="lpfc" target=14 lun=0;
name="sd" parent="lpfc" target=15 lun=0;
name="sd" parent="lpfc" target=16 lun=0;
name="sd" parent="lpfc" target=17 lun=0;
name="sd" parent="lpfc" target=17 lun=1;
name="sd" parent="lpfc" target=17 lun=2;
name="sd" parent="lpfc" target=17 lun=3;
Figure 81. Example of a start lpfc auto-generated configuration
Chapter 18. Attaching to a Sun host
169