IBM NetVista 6058, Hardware Maintenance Manual

Page: 20 / 248

Diagnostic Error Code FRU/Action
005-024-XXX Video Addressing test failure
1. Video card, if installed
2.
System board
005-025-XXX
Video Checksum Value error
1. Video card, if installed
2. System board
005-027-XXX Video Configuration/Setup error
1. Run Setup
2. Video drivers update
3.
Video card, if installed
4. System board
005-031-XXX Video Device Cable failure
1. Video cable
2.
Monitor
3. Video card, if installed
4. System board
005-032-XXX Video Device Controller failure
1. Video card, if installed
2. System board
005-036-XXX Video Register error
1.
Video card, if installed
2. System board
005-038-XXX System BIOS extension failure
1. Video card, if installed
2.
System board
005-040-XXX
Video IRQ failure
1. Video card, if installed
2. System board
005-195-XXX Video Test aborted by user
1. Information
2. Re-start the test, if necessary
005-196-XXX Video test halt, error threshold
exceeded
1. Press F3 to review the log file
2. Re-start the test to reset the log file
005-197-XXX Video test warning
1. Make sure the component that is called out is
connected and/or enabled
2.
Re-run test
3. Component that is called out in warning statement
4. Component under test
005-198-XXX Video test aborted
1. If a component is called out, make sure it is
connected and/or enabled
2. Flash the system and re-test
3. Go to the
″
Undetermined problems
″
section
6
Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648,
6649