IBM NetVista 6058, Hardware Maintenance Manual

Page: 169 / 248

POST Error Code FRU/Action
175
1. Run Configuration. See “Setup Utility
program” on page 122.
2.
System Board
176
1. Covers were removed from the computer
177 Corrupted Administrator Password
1. System Board
178
1. System Board
183
1. Enter the administrator password
184 No RFID Antenna
1. Make sure Asset Care and Asset ID are
enabled in Configuration/Setup
2. RFID Antenna
3. System Board
185 Corrupted boot sequence
1. Set configuration and reinstall the boot
sequence
186
1. System Board
187
1. Clear Administration password
2. System Board
189
1. More than three password attempts were
made to access the computer
190 Chassis intrusion detector was cleared. This is
information only, no action required. If this code
does not clear:
1.
System Board
1XX Not listed above
1. System Board
201, 20X Memory data error
1. Run Enhanced Diagnostics Memory Test
2. Memory Module
3. System Board
225
1. Unsupported Memory
229 External cache test error
1. L2 Cache Memory
2.
System Board
262 POST detected a base memory or extended
memory type error
1. Run Setup. Check System Summary menu for
memory. (See “Setup Utility program” on
page 122.)
2. Run the Extended Memory Diagnostic tests.
Chapter 3. Types 6058/6059/6269/6578/6579
155