IBM 8835 - Eserver 325 - 1 GB RAM, Maintenance And Troubleshooting Manual

Page: 96 / 164

Note: See “System” on page 94 to determine which components should be replaced by a field service technician.
Error code/symptom FRU/action
1762
(Hard disk configuration error)
1. Hard disk drive.
2. Hard disk drive cables.
3. Run the Configuration/Setup Utility program.
4. SCSI backplane.
5. System board.
1962
(Drive does not contain a valid boot
sector)
1. Verify that a startable operating system is installed.
2. Run diagnostics.
3. Hard disk drive.
4. SCSI backplane.
5. Cable.
6. System board.
2462
(Video memory configuration error)
1. Video adapter (if installed)
2. System board
5962
(IDE CD-ROM drive configuration error)
1. Run the Configuration/Setup Utility program.
2. CD-ROM drive.
3. CD-ROM power cable.
4. IDE cable.
5. System board.
6. Battery.
8603
(Pointing-device error)
1. Pointing device
2. System board
0001200
(Machine check architecture error)
1. Microprocessor 1
2. Optional microprocessor 2
3. System board
00012000
(Microprocessor machine check)
1. Microprocessor
2. System board
I9990650
(AC power has been restored)
1. Check cable.
2. Check for interruption of power.
3. Power cable.
Service processor error codes
When viewed from POST, service processor (baseboard management controller)
error codes will appear in hexadecimal form (generally beginning with A2, A3, A4,
A5, A6, A7, AD, AE, or E1), unless a Remote Supervisor Adapter is installed.
However, when viewed from the System Error Log, the messages will appear as
text. To determine a possible error condition for the service processor, see the
System Error log (see “Starting the diagnostic programs and viewing the test log”
on page 18).
ServeRAID error codes
In the following error codes, x can be any number or letter.
86
Eserver
325 Type 8835: Hardware Maintenance Manual and Troubleshooting Guide