IBM 8835 - Eserver 325 - 1 GB RAM, Maintenance And Troubleshooting Manual

Page: 61 / 164

Chapter 5. I/O connectors
Your server has the following input/output (I/O) connectors:
v
Two Ethernet (rear)
v
One serial (rear)
v
Four Universal Serial Bus (USB) (two front, two rear)
v
One video (rear)
The following illustration shows the locations of the connectors on the front panel.
USB connectors
The following illustration shows the locations of the connectors on the rear panel.
Power-cord
connector
Serial
connector
Video
connector USB connectors
Gigabit Ethernet 2
connector (LAN2)
Gigabit Ethernet 1
connector (LAN1)
The following sections describe these connectors.
If you have an optional Remote Supervisor Adapter II (system-management
adapter) installed in PCI-X slot 2, the adapter has an Ethernet connector, a serial
connector, and an Advanced System Management (ASM) Interconnect connector.
See the documentation that comes with the Remote Supervisor Adapter II for more
information about these connectors and LEDs.
Ethernet connector
The following illustration shows the dual Ethernet connectors.
1 1 8 8
Link LEDs
Activity LEDs
Connect Category 3, 4, or 5 unshielded twisted-pair cables to these connectors.
The 100BASE-TX and 1000BASE-T Fast Ethernet standards require Category 5 or
higher cabling.
For more information about the Ethernet controller, see the User’s Guide .
© Copyright IBM Corp. 2002, 2003
51