IBM 86655RY - Netfinity 7600 - 8665, Hardware Maintenance Manual, Page: 80 / 294

70
Hardware Maintenance Manual: Netfinity 7600 – Type 8665 Models 1RY, 2RY
Installing a 5.25-inch removable-media drive
Refer to the following illustrations when installing a 5.25-inch removable media drive.
Before you begin:
• Read “Safety information” on page 249.
• Review the information in “Before you begin” on page 60.
• Read the documentation that comes with the option.
Choose the bay in which you want to install the drive. Also, check the instructions
that come with the drive to see if you need to set any switches or jumpers on the
drive.
To install a removable-media drive in one of the left front bays:
1. Review the information in“Before you begin” on page 60.
2. Turn off the server and all attached devices. Disconnect all external cables and
remove the top cover.
3. Remove the media-bay bezel.
4. Remove the filler panel from the bay opening. Keep the filler panel nearby.
Note:
The server EMI integrity and cooling are both protected by having the left
front bays covered or occupied. When you install a drive, save the filler
panel from the bay, in case you later remove the drive and do not replace it
with another.
5. Touch the static-protective bag containing the drive to any unpainted metal
surface on the server; then, remove the drive from the bag and place it on a static-
protective surface.
6. Remove the snap-on slide rails from the filler panel and snap the rails on the
drive. Store the filler panel for later use.
Note: Slide rails for installing a tape drive are attached with screws. Use the
screws to attach the rails to the side of the tape drive.
7. Align the slide rails on the drive with the guide rails in the bay; then, slide the
drive into the bay until it snaps into place.
Note: If you are installing a tape drive, use the screws that are shipped next to
the tape drive rails to attach the tape drive to the front of the chassis.
8. Disconnect the shuttle (see “Disconnecting the shuttle” on page 128).
Drive
Slide rails
Filler panel with
EMI sheild
Slide rails for
use with a tape drive