manualshive.com logo in svg

IBM 86655RY - Netfinity 7600 - 8665, Hardware Maintenance Manual, Page: 124 / 294

Share
Download
IBM 86655RY - Netfinity 7600 - 8665 Hardware Maintenance Manual Download Page 124

 114

Hardware Maintenance Manual: Netfinity 7600 – Type 8665 Models 1RY, 2RY

 

 

All privileges (Insert, Delete, Select, and Update) are selected by default.  
A user ID must have all of these privileges to export data to the database.

d. Click OK to open the Database Server window.

•

Revoke  

Disables access to a database for a specified user ID. To revoke access:  

a.

Click Revoke.

b.

In the User ID field type the user ID that will have access to the database 
revoked.

c.

Deselect privileges to be revoked for this ID.  

All privileges (Insert, Delete, Select, and Update) are selected by default.  
A user ID must have all of these privileges to export data to the database. 
Some or all of these privileges can be revoked.

d. Click OK to open the Database Server window.

4.

Select the database within which the table groups will be created.

5.

Click OK.  

The Netfinity Manager Database Access window opens.

6.

Type in the User ID field  

netfin

 

netfin is the qualifier name of the Netfinity Manager database.

7.

In the Password field type the password that enables access to the Netfinity 
Manager database.

8.

Click OK.

As the information is processed, a 

Creating tables

 status message should be 

displayed. When the operation completes, a 

Requested Action Completed

 message 

should be displayed.

Supported and certified databases

The following tables show databases and operating systems that are certified for use 
with this release of Netfinity Manager.

Table 18. Supported Netfinity Databases for Windows.. Reference by operating system and database client 
version.

Product

Windows 95

Windows NT 3.51

Windows NT 4.0

IBM DB2 Version 2.1.2

Yes

Yes

Yes

IBM DB2 Universal Database 
5.0

Yes

Yes

Yes

ODBC - IBM DB2 Version 2.1.2 Yes, DB2 Driver

Yes, DB2 Driver

Yes, DB2 Driver

ODBC - IBM DB2 Universal 
Database 5.0

Yes, DB2 Driver

Yes, DB2 Driver

Yes, DB2 Driver

ODBC - Microsoft SQL Version 
7.0

Yes, Microsoft SQL Driver

Yes, Microsoft SQL Driver Yes, Microsoft SQL Driver

ODBC - Microsoft SQL Version 
6.5

Yes, Microsoft SQL Driver

Yes, Microsoft SQL Driver Yes, Microsoft SQL Driver

Lotus Notes Version 4.5.2

Yes

Yes

Yes

Summary of Contents for 86655RY - Netfinity 7600 - 8665







































































































































































































































































































Reviews:

No comments