manualshive.com logo in svg

IBM 86655RY - Netfinity 7600 - 8665, Hardware Maintenance Manual, Page: 125 / 294

Share
Download
IBM 86655RY - Netfinity 7600 - 8665 Hardware Maintenance Manual Download Page 125

 

 Netfinity Manager

 115

Starting Netfinity Manager

To start Netfinity Manager:  

1.

Open the Netfinity Manager folder or program group.  

During installation of Netfinity Manager, a Netfinity Manager folder (OS/2, 
Windows 95, or Windows NT 4.0 only) or a Netfinity Manager program group 
(Windows NT 3.51 only) was added to the Desktop. The Netfinity Manager folder 
or program group contains the Netfinity Manager Service Manager object.

Lotus Notes Version 4.5.3a

Yes

Yes

Yes

Lotus Notes Version 4.6

Yes

No

Yes

Lotus Notes Version 4.6a

Yes

No

Yes

Lotus Notes Version 4.63

Yes

No

Yes

Oracle Version 7.3

Yes, Oracle Driver Version 
2.0.3.1.1

Yes, Oracle Driver 
Version 2.0.3.1.1

Yes, Oracle Driver Version 
2.0.3.1.1

Oracle Version 8.0

Yes, Oracle Driver Version 
8.0.3.0.0

No

Yes, Oracle Driver Version 
8.0.3.0.0

Sybase SQL Version 11.0

Yes, Sybase Driver Version 
10.0.3T4

Yes, Sybase Driver 
Version 10.0.3T4

Yes, Sybase Driver Version 
10.0.3T4

Note:

The above applies to Netfinity Manager Release 5.2.0 and later.

Table 19. Supported Netfinity Databases for OS/2.. Reference by operating system and database client 
version.

Product

OS/2 Warp Connect

OS/2 Warp 4.0

IBM DB2 Version 2.1.2

Yes

Yes

IBM DB2 Universal Database 5.0

Yes

Yes

ODBC - IBM DB2 Version 2.1.2

Yes, DB2 Driver

Yes, DB2 Driver

ODBC - IBM DB2 Universal Database 5.0

Yes, DB2 Driver

Yes, DB2 Driver

ODBC - Microsoft SQL Version 7.0

Yes, Visigenic Driver Version 
1.10

No

ODBC - Microsoft SQL Version 6.5

No

No

Lotus Notes Version 4.5.2

Yes

Yes

Lotus Notes Version 4.5.3a

Yes

Yes

Lotus Notes Version 4.6

No

No

Lotus Notes Version 4.6a

No

No

Lotus Notes Version 4.63

No

No

Oracle Version 7.3

No

No

Oracle Version 8.0

No

No

Sybase SQL Version 11.0

No

No

Note:

The above applies to Netfinity Manager Release 5.2.0 and later.

Table 18. Supported Netfinity Databases for Windows.. Reference by operating system and database client 
version.

Product

Windows 95

Windows NT 3.51

Windows NT 4.0

Summary of Contents for 86655RY - Netfinity 7600 - 8665







































































































































































































































































































Reviews:

No comments