manualshive.com logo in svg

IBM 86655RY - Netfinity 7600 - 8665, Hardware Maintenance Manual, Page: 121 / 294

Share
Download
IBM 86655RY - Netfinity 7600 - 8665 Hardware Maintenance Manual Download Page 121

 

 Netfinity Manager

 111

directories are not included in this statement, it is not possible to export to the 
Lotus Notes database.

Once these steps have been completed, export system information from Netfinity 
Manager to an easy-to-browse Lotus Notes database.

Browsing the Netfinity Manager Lotus Notes 
database

To browse the data contained in the Netfinity Manager Lotus Notes database:  

1.

Open the Netfinity Database object in the Lotus Notes Workspace.

2.

Select from the View pull-down menu the section of the Netfinity Manager 
database to be browsed.  

The Netfinity Manager database is divided into sections that contain data 
gathered by specific Netfinity Manager services. Click the name of the service that 
gathers the data to be viewed (for example, Alert Logs).

 

Note:

Some menu selections will contain submenus.

3.

Information contained in the part of the Netfinity Manager database that has been 
selected is now listed in the window.  For more detailed information about any 
displayed data item, double-click the data item.

4.

Some data items can be expanded to reveal additional information. These items 
are identified by a plus sign (+) in the left side border of the Notes window, beside 
the name of the data item.  To expand the data item, select the item and then click 
Expand

 in the View pull-down menu.

ODBC database support

Netfinity Manager supports exporting data via ODBC for use on SQL or DB2 
database systems.

Note:

ODBC database export is available only on systems that are running Netfinity 
Manager.

System requirements

The minimum requirements for Netfinity Manager ODBC database export are:  

•

Windows NT  

— ODBC 

— ODBC support for one or more of the following database management 

systems (DBMS):  

–

IBM DB2

–

Microsoft SQL Server

•

Windows 95, with:  

— ODBC 

— ODBC support for one or more of the following database management 

systems:  

–

IBM DB2

–

Microsoft SQL Server

•

OS/2  

Summary of Contents for 86655RY - Netfinity 7600 - 8665







































































































































































































































































































Reviews:

No comments