Completion of the command
Normal completion of the wrap test (except the reply_mode) will be:
<slot.port> Test successful ==> no failure was found.
<slot.port> Test failed ==> a problem was found in the module.
For the ports which have not been disabled before the command was issued, the following message will
be returned:
<slot.port> Port not disabled. Execute the command to disable the port.
If the installed port does not support the wrap test (example: 8260 compatible modules), the following
message will be returned :
<slot.port> Not supported on this type of port.
Wraps Available
The following table gives the wraps available on WAN 2 I/O card.
Table
3-1. Wraps available on WAN Modules
Wraps
WAN I/O Card
E3
DS3
OC3
SMT1
E1
T1(DS1)
Internal
X
X
X
X
X
X
External
X
X
X
X
X
X
Reply_Mode
X
X
X
X
X
X
Payload
X
X
Far_End_Mode
X
X
Far_End_Payload
X
Note: X means that the wrap is available for the I/O card.
Chapter 3. Procedures
3-9
Summary of Contents for 8265 Nways ATM Switch
