![background image](http://html2.mh-extra.com/html/ibm/8265-nways-atm-switch/8265-nways-atm-switch_problem-determination-and-service-manual_3312418087.webp)
007
– At this point, to ensure that the LEDs are OK, perform a LED test by pushing the 'LED Test' button from
any controller module (slots 18/19).
Is the Reset LED either steady ON or blinking on any other module in the chassis (ensure that you
have exited the LED test)?
Yes No
008
– You have exited the LED test. Go to Step 011.
009
– Wait approximately one minute. If the Reset LED remains ON or blinking, re-insert the module.
Does the Reset LED flash once then stays OFF after module re-insertion?
Yes No
010
– If the Reset LED keeps steady ON: insert the module into another slot. If the result is still the
same, replace the module. Go to Chapter 4, “FRU Exchange” on page 4-1.
– If the Reset lights regularly, go to “MAP 0460: Reset Problem on Media Module” on page 2-59.
011
Is the Status LED ON for every module in the chassis?
Yes No
012
The corresponding module is not connected to the CPSW.
– Enter
show module <slot> command you should get:
Slot Install Connect Operation General Information
------------------------------------------------------
xx
Y
N
N
8265 ATM n ports xxxMbps
– Enter the
set module xx connected command to connect the module to the CPSW. Go to Step
013.
013
– Enter the
show module <slot> verbose command.
Is the following type of message displayed?
Slot Install Connect Operation General Information
------------------------------------------------------
xx
Y
Y
Y
8265 ATM n ports xxxMbps
status: connected / hardware okay
enable / normal
Yes No
Chapter 2.
MAPS
2-55
Summary of Contents for 8265 Nways ATM Switch
