![background image](http://html2.mh-extra.com/html/ibm/8265-nways-atm-switch/8265-nways-atm-switch_problem-determination-and-service-manual_3312418086.webp)
MAP 0450: Module Installation Problem
Important
This MAP must be followed under PE guidance.
Notes
For modules in slots 18 and 19 (controller modules), go to “MAP 0160: Controller Module LEDs”
on page 2-14.
8260 modules can ONLY be installed in slots 1, 3, 5, 7. To recognize these modules, refer to the
8265 Nways ATM Media Module Reference Guide, SA33-0459 (if needed).
To verify the status and hardware level of a module in a chassis, enter the
show module <slot>
verbose command on the CPSW console.
Though 8265 and 8260 modules are hot-swappable, it is advised that the
set module <slot>
isolated command is entered on the console before removing a module. When the module is
replaced by the same type of module, the previous module configuration is kept by the system.
001
Is the "wrong slot LED" OFF on all modules in the chassis?
Yes No
002
– Refer to the
8265 Nways ATM Switch Installation Guide, SA33-0441 to determine which modules
can be installed in their corresponding slot. The CPSW module can only be installed in slots 9
and 11. Other modules can fit into slots 1 to 8 and 12 to 17.
– Go to Step 003.
003
Are power requirements met for this module?
Yes No
004
To verify this, go to “How to See the Power Requirement for a Module” on page 3-27.
005
Is the module at the correct hardware level?
Yes No
006
To verify this and acquire information on hardware updates go to “Compatibility Problems between
Hardware and Microcode Module Levels” on page 2-68.
Symptom Explanation
Problems related to modules installed in slots 1 to 8 and 12 to 17, especially insertion, connection,
status LED down problem.
2-54
8265 PD and SG
Summary of Contents for 8265 Nways ATM Switch
