![background image](http://html2.mh-extra.com/html/ibm/8265-nways-atm-switch/8265-nways-atm-switch_problem-determination-and-service-manual_3312418132.webp)
5. Unscrew the nine screws from CP side
.5/
and the two standoffs.
J4
J7
5
6. Unplug the CP from the switch card (two connectors, one near the PCMCIA and the other near the
tri_channel).
7. Verify that the daughter card is correctly seated on the switch connectors J4 and J7.
8. Re-plug CP connectors onto switch connectors carefully.
9. Screw the nine screws
.5/
on the CP (three up and three down, two on the rear, one in the middle).
10. Replace upper and lower standoffs and replace the face plate. Screw up the eight screws
.2/
on the
face plate (the four screws on CPSW top side are in V).
11. Replace the two levers with their pins
.4/
and secure them with their clamps
.3/
.
12. Replace the two RS232 connector screws
.1/
.
3-30
8265 PD and SG
Summary of Contents for 8265 Nways ATM Switch
