CPSW / CPSW2 Exchange
Important
In a 8265 with two installed CPSW2 modules with their internal power control active, removal of the
active CPSW2 module causes a fast reset (the standby CPSW2 module becomes the active CPSW2).
In a 8265 with one installed CPSW2 module and without of any controller module, removal of the
CPSW2 module causes the switch to go down.
1
Loosen the screws at the top and bottom CPSW faceplate.
2
Using the top and bottom lever extract the CPSW from the 8265 chassis.
3
If you exchange a CPSW2 verify on the new CPSW2 the switch setting located in the bottom left of
the module. Set this switch as it was on the removed CPSW2.
Notes:
a. When this switch is down (OFF) the power and fan control is assured by the CPSW2.
b. When this switch is up (ON) the power and fan control is assured by the controller module(s)
installed in the 8265.
4
Re-insert the new CPSW into the 8265 chassis.
5
Secure it with the screws located at the top and bottom of the CPSW module.
Chapter 4. FRU Exchange
4-9
Summary of Contents for 8265 Nways ATM Switch
