IBM 7133 Series, Service Manual

Page: 180 / 230

|
Dummy Fan-and-Power-Supply Assembly (Models 010 and 500 Only)
Notes:
1. Unless you have a particular reason to do so, do not turn off the using system or the
7133 when removing or installing the dummy fan-and-power-supply assembly.
2. The diagrams in these instructions show a 7133 Model 010. The procedure for Model
500 is the same, except that everything is turned through 90 degrees.
3. The dummy fan-and-power-supply assembly can be present only in position 1 (as
shown in the diagram).
1
At the back of the 7133, remove the power cable
1
from the hole in the dummy
fan-and-power-supply assembly.
2
Open the latch
2
on the assembly.
3-34
7133 Service Guide