IBM 6400-D Generation II Series, Setup Manual

Page: 140 / 184

140
Chapter 6
Fault Messages
062 MACHINE CHECK
SEE USERS GUIDE Yes Sensors cannot detect
current in fan circuit. Power off the printer
and remove paper
guide assembly (for
instructions, refer to
your
IBM 6400
Maintenance
Information Manual).
Check that the fan
cable is connected.
Check for obstruction
of vents and fan airway;
remove any
obstructions. Check for
items beneath the
printer blocking cabinet
vents. Power on the
printer. If this message
reoccurs, contact IBM
service.
NOTE: This message
should not
appear on a
Pedestal model.
If this message
does appear,
contact IBM
service.
065 HAMMER FAN CHECK*
SEE USERS GUIDE Yes Sensors cannot detect
current in fan circuit. Power off the printer
and remove paper
guide assembly (for
instructions, refer to
your
IBM 6400
Maintenance
Information Manual).
Check that the fan
cable is connected.
Check for obstruction
of vents and fan airway;
remove any
obstructions. Check for
items beneath the
printer blocking cabinet
vents. Power on the
printer. If this message
reoccurs, contact IBM
service.
069 DATA CLEARED N/A Appears when data is
cleared out of printer
after Cancel key has
been pressed. No action necessary.
080 POWER SUPPLY HOT No Circuits are
overheating on the
power supply board. Contact IBM service.
Fault
Message
Operator
Correctable?
Explanation Solution