IBM 6400-D Generation II Series, Setup Manual

Page: 51 / 184

Load The Paper
51
Figure 38. Paper Supply Label Location (Cabinet Models Only)
4. Prepare the paper supply:
•
Cabinet models: Open the front door of the printer cabinet. Place the
paper supply inside the printer, on the floor of the cabinet. Align the paper
supply with the front label on the floor of the printer. Ensure that the paper
pulls freely from the box. See Figure 38.
•
Pedestal models: Place the paper supply on the floor in front of the
printer, or on the optional paper shelf, if attached. Ensure that the paper
pulls freely from the box.
Figure 39. Feeding the Paper
5. Feed the paper up through the paper slot. On pedestal models, be sure
the paper feeds between the two wire guides. Hold the paper in place with
one hand (to prevent it from slipping down through the paper slot) while
pulling it through from above with your other hand. See Figure 39.
NOTE: For the pedestal model, this procedure shows loading paper when
using the rear paper exit. For information on loading paper using the
top paper exit, see the
IBM 6400-D Series Operator’s Guide.
Paper
Slot
Paper
Slot