IBM 6400-D Generation II Series, Setup Manual

Page: 100 / 184

100
Chapter 4
Printer Control Menu
When TOP EXIT TEAR mode is selected, the Eject/Restore key operates as
follows:
•
Pressing Eject/Restore causes the paper to advance the bottom of the
last printed form to the tear position, ready for the operator to tear off the
printed forms.
•
Pressing Eject/Restore a second time causes the paper to move into
position such that the top of the first possible form available for printing is
positioned ready for printing. (The direction and amount of paper
movement will depend on the length of the forms; one or more blank
forms will be skipped.)
NOTE: The TOP EXIT TEAR setting is meaningful only on pedestal model
printers. TOP EXIT TEAR cannot be selected on cabinet model
printers.
Forms length must be set correctly for the TOP EXIT TEAR mode to
function properly.
PTR Setup Option
This option selects the Special Function Control Code (SFCC) for the
PTR_SETUP command and functions. The selections for this process are
given below.
Setup Parse
This selection is used to enable or disable the PTR Setup Option. The default
is disable.
Setup SFCC
Sets the legal hex values from 01 through FF. These represent the ASCII
code (in hexadecimal) of the character used as the SFCC. The default hex
value is 21, which corresponds to the “!” character.
Print DBCS Font File History Log
Currently, this option should not print any History Log of the font file.
File System
Provides the means for listing, viewing, and manipulating files in flash
memory. The following selections are available.
Overwrite Files
This selection controls whether the files in flash memory can be overwritten.
With the default selection of Enable, files are overwritten. If the selection is
disabled, the files can not be overwritten.