IBM 6400-D Generation II Series, Setup Manual

Page: 82 / 184

82
Chapter 3
Changing Parameters
Changing Parameters
The following procedure shows you how to change a configuration setting.
Changing the Print Direction from the factory default setting BIDIRECTIONAL
to the setting UNIDIRECTIONAL is provided as an example. Print Direction is
one of the Printer Control menu options. The procedure is similar for other
configuration changes. Use these basic guidelines to navigate the
configuration menus and change other parameters.
NOTE: You can press Start at any time to exit the configuration menu.
PRINTER CONTROL
Interface
Selection Display
Language Alarm
Control Print Direction
Hex Print
Mode
* = Factory Default
Bidirectional*
Unidirectional
. . .
Step Key LCD Results Notes
1. Determine which parameters you want to change and what the new values will be. In this
example, the value for the PRINT DIRECTION parameter will be changed from
“BIDIRECTIONAL” to “UNIDIRECTIONAL.”
2. Press NOT READY Places the printer in NOT READY
mode before entering the operator
menus.
3. OPERATOR MENU
UNLOCKED Unlocks the Operator Menu, which
allows you to make configuration
changes.
4. OPERATOR MENU
PRINTER CONTROL Displays the first Configuration
Main Menu option, PRINTER
CONTROL.
5. PRINTER CONTROL
INTERFACE SELECTION Moves into the PRINTER
CONTROL menu.
Stop
Scroll
↑
Scroll
↓ +
Menu
Enter