IBM 6400-D Generation II Series, Setup Manual

Page: 148 / 184

148
Chapter 7
Configuring The RibbonMinder
Ribbon Type
RIBBON TYPE specifies the type of the ribbon installed. When installing or
replacing a ribbon, you can adjust the ribbon type by using the Ribbon Type
option.
The default ribbon type is
PREMIUM
30.
Press the Scroll
↑
and Scroll
↓
keys to select the ribbon type.
Ribbon End Point
RIBBON END POINT allows the printing of more or less pages before the
display reaches 0%.
•
Normal - 0% (default)
•
Reduce 5% through 100% in increments of 5% allows you to lower the life
expectancy of the ribbon installed.
•
Extend 100% through 0% in increments of 5% allows you to increase the
life expectancy of the ribbon installed.
Pressing the Scroll
↑
key increases the percentage, while pressing the
Scroll
↓
key decreases the percentage.
New Ribbon Detect
NEW RIBBON DETECT selects the way the fault message will be reset.
•
ENABLE, the Ribbon Out of Ink, Change Ribbon fault will be reset when
the platen is opened. Opening the platen will also reset the ribbon life to
100%.
•
DISABLE (the default), the ribbon life may only be reset using the new
ribbon menu option.