IBM 6400-D Generation II Series, Setup Manual

Page: 71 / 184

Configuration
71
Factory Default Configuration Values
The factory default values are permanently stored as a configuration. They
cannot be modified or erased. The parameters which display depend on
which interface and emulation is installed.
Configuration
Below is a representative Hanzi printer factory default configuration. Your
factory default configuration will depend on the features installed on your
printer.
CURRENT CONFIGURATION
File Part Number (See Reference Number)
Reference Number XXXXXX
Hanzi Line GB Version x.xxx
DC Vx.xxx XX-XXX-XX #XXXXXX
EC PPC HANZI Vx.xxx XX-XXX-XX #XXXXXX
BOOT/CMX Vx.xxx XX-XXX-XX #XXXXXX
SHUTTLE TYPE 2000S
SHUTTLE PHASE 45
FLASH 12 MB
DRAM 32 MB
SECURITY PAL 363167-001
CONFIGURATION CODE FH3
QUICK SETUP
RECALL CUSTOM SET FACTORY DEFAULT
SAVE CURRENT VALUES CUSTOM SET 1
CHANGE POWER ON SET FACTORY DEFAULT
DBCS TO ASCII DBCS MODE
PRINT QUALITY NEAR LQ
HIGH DENSITY DISABLE
CHARACTERS PER INCH 10.0 CHARACTERS PER
IN
DBCS CPI 6.7 CPI
LINES PER INCH 6.0 LINES PER INCH
DBCS ASCII STYLE NORMAL
GRAPHICS SPD UP NORMAL
RESET COMMAND LOAD FACTORY
Factory Default Configuration Values