IBM 2027-R04, Installation And Service Manual

Page: 100 / 116

SAN16M-R SAN Router Installation And Service Manual 76
• Europe/Australia: Nominal 220/240 volts, 50 to 60 Hz
Power consumption
• Dual redundant power supplies, each with a maximum power
consumption of 250 Watts for the SAN Router.
• Power consumption: 190 Watts.
Environmental requirements
• Temperature: 5° to 40° C (41° to 104° F).
• Humidity: 20% to 85% non-condensing.
• Heat output: 650 BTU/hr.
Compatible transceivers
The following information regarding compatible transceiver modules
applies to the SAN Router except where specified.
1G FC multi-mode, LC connectors
•
Agilent Technologies
- HFBR-5701L - 1G Fibre Channel
100-M5-SN-1/100-M6-SN-1 (Multi-Mode, LC Connector)
Transceivers
•
Agilent Technologies
- HFBR-5701LP - 1G Fibre Channel
100-M5-SN-1/100-M6-SN-1 (Multi-Mode, LC Connector)
Transceivers
•
JDS Uniphase
- JSP-21S0AA1 -1G Fibre Channel
100-M5-SN-1/100-M6-SN-1 (Multi-Mode, LC Connector)
Transceivers
•
JDS Uniphase
- JSM-21S3AAP - 1G Fibre Channel
100-M5-SN-1/100-M6-SN-1 (Multi-Mode, LC Connector)
Transceivers
•
PicoLight
- PL-XPL-00-S23-71 - 1G Fibre Channel
100-M5-SN-1/100-M6-SN-1 (Multi-Mode, LC Connector)
Transceivers