IBM 2027-R04, Installation And Service Manual

Page: 75 / 116

51 Chapter 3: Maintenance and troubleshooting
connectors. These ports provide 2Gbps connectivity and can be
configured as:
• FC_Auto (default)
• FL_Port
• F_Port
• L_Port
• R_Port
Intelligent
Ethernet ports for
IP connection
There are four user-configurable intelligent IP ports located on the
front of the SAN Router, labeled 13 through 16. Each of these ports
has a connector, for 1 Gbps SFP connection. Each intelligent port can
be configured for either Internet Small Computer Systems Interface
(iSCSI), or Internet Fibre Channel Protocol (iFCP).
Management ports
There are two management ports located on the front of the SAN
Router. An RS-232 serial port that can be connected to a VT100 or
terminal emulator for access to the Command Line Interface (CLI),
and RJ45 port that can be connected to the LAN for Out-of-Band
management using the SAN Router Element Manager. The RJ45
management port can be accessed by any PC on the LAN with a web
browser.