IBM 2027-R04, Installation And Service Manual

Page: 86 / 116

SAN16M-R SAN Router Installation And Service Manual 62
— Blow compressed air on the surfaces and end of the connector
continuously for approximately five seconds.
Figure 17 Clean fiber-optic components
3. Gently wipe the end-face (1) and other surfaces of the connector
with an alcohol pad as shown in (2) of Figure 17 . Ensure the pad
makes full contact with the surface to be cleaned. Wait
approximately five seconds for cleaned surfaces to dry.
4. Repeat step 2 and step 3 of this procedure (second cleaning) and
again (third cleaning), then reconnect the fiber-optic cable to the
port.
1 2
i12M1072