IBM 2027-R04, Installation And Service Manual

Page: 82 / 116

SAN16M-R SAN Router Installation And Service Manual 58
To upload the
System Log
from the SAN Router to the management
workstation, follow these instructions:
1. Select
File
>
System Log
>
Retrieve
to display the
Retrieve System Log
dialog box ( Figure 15 on page 58).
Figure 15
Retrieve the system log dialog box
2. Type the IP address where the management workstation TFTP
server resides.
3. Type or modify the name of the file where you want this segment
of the log stored. For some TFTP servers, if you are creating a new
file, you must place it in an existing subdirectory.
4. Click the
Retrieve
button.
5. Click
OK
to empty the
System Log
.
Accessing SNMP alerts or alarms
The SAN Router sends SNMP traps (alerts or alarms) to designated
IP addresses (workstations) where the alerts or alarms can be viewed.
In order to receive SNMP alerts, the SAN Router must be configured
to enable SNMP traps (alerts or alarms). Review the
Administration
and Configuration Manual
for information on configuring SNMP traps.
The SNMP traps are configured to be routed to specific workstations
based on IP address. The data from the SNMP alerts can be viewed
from Element Manager and SANvergence Manager. Also, there is a
utility called the TrapViewer that is shipped with SANvergence
Manager you can use to view the SNMP alerts or alarms.
i264001
1