IBM 2027-R04, Installation And Service Manual

Page: 18 / 116

SAN16M-R SAN Router Installation And Service Manual xvi
• Never turn on any equipment when there is evidence of fire,
water, or structural damage.
• Disconnect the attached power cords, telecommunications
systems, networks, and modems before you open the device
covers, unless instructed otherwise in the installation and
configuration procedures.
• Connect and disconnect cables as described below when
installing, moving, or opening covers on this product or attached
devices.
To Disconnect:
1. Turn everything OFF (unless instructed otherwise).
2. Remove power cords from the outlet.
3. Remove signal cables from connectors.
4. Remove all cables from devices.
To Connect:
1. Turn everything OFF (unless instructed otherwise).
2. Attach all cables to devices.
3. Attach signal cables to connectors.
4. Attach power cords to outlet.
5. Turn device ON.
(D005)
Labels
As an added precaution, safety labels are often installed directly on
products or product components to warn of potential hazards. These
can be either danger or caution notices, depending upon the level of
the hazard.
The actual product safety labels may differ from these sample safety
labels:
DANGER
Hazardous voltage, current, or energy levels are present inside any
component that has this label attached.
(L001)
Do not service, there are no serviceable parts.