IBM 2027-R04, Installation And Service Manual

Page: 62 / 116

SAN16M-R SAN Router Installation And Service Manual 38
NOTE:
If the SAN Router is shipped pre-installed in a cabinet, the default IP
address is set during the cabinet configuration process to 10.xx.yy.zz where:
xx is the cabinet number, yy is the product type identifier, which for the SAN
Router is 16, and zz is the position in the cabinet, from bottom to top.
Backup for Port Disabled Configuration>iFCP>Port
Redundancy
Timeout for backup Activation (in
secs) 5 Configuration>iFCP>Port
Redundancy
Recovery Method Manual Configuration>iFCP>Port
Redundancy
Table 15
SAN Router firmware default values via Element Manager (Continued)
Element Manager parameters Default setting Element Manager menu hierarchy
Table 16
SAN Router firmware default values via SANvergence
SANvergence Parameters Default Setting SANvergence Menu Hierarchy
E_Port and Fabric Configuration
Fabrics
Fabric Name Fabric-ID 1 mSAN
Configuration>Actions>Fabric
Configuration>Fabrics
Connection Mode Open Fabric 1.0 mSAN
Configuration>Actions>Fabric
Configuration>Fabrics
Zone Policy Append SAN
Router Zones mSAN
Configuration>Actions>Fabric
Configuration>Fabrics
R_Ports
Fabric 1-Fabric-ID 1 mSAN
Configuration>Actions>Fabric
Configuration>R_Ports