IBM 2027-R04, Installation And Service Manual

Page: 34 / 116

SAN16M-R SAN Router Installation And Service Manual 10
• Standard 19-inch EIA-compliant equipment rack if you are
mounting the SAN Router in a rack.
• Maintenance terminal (VT-100 or a PC with terminal emulation
software) - the terminal is required to configure the SAN Router
management IP address.
• Fiber-optic cleaning kit - The kit contains tools and instructions to
clean fiber-optic cable, connectors, loopback plugs, and protective
plugs.
Package contents
Unpack the contents of the shipping package and verify that you
have received the following items in good condition:
• The SAN Router chassis with two power cords.
• RS-232 serial (null modem) cable.
• Ethernet cable.
• 16 SFP optics for multi-mode Fibre connectivity.
• Loopback connector (used for testing ports).
• Software and documentation CD.
If an item is missing or damaged, contact your supplier and the
carrier who delivered the package. To return the product, contact
your IBM representative. When you return a product, pack it in the
original (or equivalent) packing material to maintain the warranty.
NOTE:
The rack mount kit is shipped separately from the SAN Router.
Safety precautions
ATTENTION!
Small Form Factor Pluggable (SFPs) are static-sensitive
devices. Always wear anti-static wrist straps while handling SFPs. When not
in use, SFPs should always be stored in antistatic bags.
ATTENTION!
SFP modules used in this product must comply with IEC
60825-1 as a CLASS 1 LASER PRODUCT and FDA 21 CFR Chapter 1, Subpart
J, Parts 1040.10 and 1040.11.