VDSL2 Gateway Router
9
Figure 3
2)
Configure the network parameters. The IP address is 192.168.1.xxx
("xxx" is any number from 2 to 254), Subnet Mask is 255.255.255.0, and
Gateway is 192.168.1.1 (The Router's default IP address).
Obtain an IP address automatically
1)
Set up the TCP/IP Protocol in "
Obtain an IP address automatically
"
mode on your PC.
2)
Then the built-in DHCP server will assign IP address for the PC.
Now, you can run the Ping command in the
command prompt
to verify the network
connection between your PC and the Router. The following example is in Windows
2K/ XP/ OS.
Open a command prompt, and type
ping 192.168.1.1
, and then press
Enter
.
