VDSL2 Gateway Router
4
The following table describes the interfaces or the buttons.
Interface
Description
DSL
RJ-11 port: Connect the router to DSL connector or splitter through
telephone cable.
LAN 4~1
RJ-45 port, for connecting the router to a PC or another network
device.
Reset
Press the button for at least 1 second and then release it. System
restores the factory default settings.
USB1/2
For connecting the 3G network adapter or other USB storage
devices.
Power
Power interface, for connecting the power adapter.
On/Off
Power switch.
WLAN
WLAN switch, for enabling or disabling the WLAN function.
WPS
This button is used for enabling WPS PBC mode. If WPS is enabled,
press this button, and then the wireless router starts to accept the
negotiation of PBC mode.
Warning:
Do not press the
Reset
button unless you want to clear the current settings. The
Reset
button is in a small circular hole on the rear panel. If you want to restore the
default settings, please press the
Reset
button gently for 1 second with a fine needle
inserted into the hole and then release the button. The system reboots and returns to
the factory defaults.
