VDSL2 Gateway Router
42
Step9
In this page, you can obtain the DNS server addresses from the selected
WAN interface. After finishing setting, click
Next
to display the following
page.
Step10
In this page, it displays the information about the IPoA settngs. Click
Apply/Save
to save and apply the settings. You can modify the settings
by clicking the
Back
button if necessary.
6.2.2.5 Adding a Bridge WAN service
This section describes the steps for adding the Bridge WAN service.
Step1
In the
Wide Area Network
(WAN) Service Setup
page, click the
Add
button to display the following page. (At first, you must add a proper ATM
or PTM interface for this WAN service.) Click the
Add
button to display
the following page.
