VDSL2 Gateway Router
57
Use interface
: Select an interface that you want to configure.
Select an application:
Select a proper application in the drop-down list.
Custom application:
Manually define an application.
Trigger port Start:
The start port number that LAN uses to trigger the open
port.
Trigger port End:
The end port number that LAN uses to trigger the open
port.
Trigger Protocol:
Select the application protocol. You may select TCP/UDP,
TCP, or UDP.
Open Port Start:
The start port number that is opened to WAN.
Open Port End:
The end port number that is opened to WAN.
Open Protocol:
Select the proper protocol that is opened to WAN. You may
select TCP/UDP, TCP, or UDP.
After finishing setting, click
Save/Apply
to apply the settings.
Note:
You can use a single port number, several port numbers separated by commas,
port blocks consisting of two port numbers separated by a dash, or any
combination of these, for example 80, 90-140, 180.
