VDSL2 Gateway Router
46
In this page, you are allowed to configure the settings of the 3G USB modem.
Support NDIS:
If you want to use NDIS the Internet through the NDIS
enabled 3G network card, you must enable this.
User Name:
Username provided by your 3G ISP.
Password:
Password provided by your 3G ISP.
Authentication Method:
Select a proper authentication method in the drop-
down list. You can select Auto, PAP, CHAP, or MSCHAP.
APN:
APN (Access Point Name) is used to identify the service type. Enter
the APN provided by your 3G ISP.
Dial Number:
Enter the dial number provided by your 3G ISP.
Idle time (in sec.):
If no traffic for the preset time, the 3G will disconnect
automatically.
Net Select:
Select the 3G network that is available.You may select EVDO,
WCDMA, CDMA2000, TD-SCDMA, GSM, or Auto.
Dial on demand
: Within the preset minutes, if the modem does not detect
the flow of the user continuously, the modem automatically stops the 3G
connection. Once it detects the flow (like access to a webpage), the modem
restarts the 3G dialup.
Dail Delay (in sec.)
: The 3G delays dial after the DSL is disconnected.
Default WAN Connection Select
: You can select DSL or 3G from the
drop-down list.
WAN Failover
: The 3G connection is backup for the DSL connection.
–
DSL
: If the DSL is disconnected, the 3G starts to dial.
–
IP connectivity
: If the system fails to ping the specified IP address, the
3G starts to dial.
After finishing setting, click the
Apply/Save
button to save the settings.
You may also click the
auto setting
button to automatically configure the 3G
connection.
After clicking the
Apply/Save
button, the following page appears.
