iBall Baton iB-WVG300N User Manual Download Page 21

Page: 21 / 126

VDSL2 Gateway Router

This page displays the device information such as the board ID, software version, and

the information of your WAN connection such as the upstream rate and the LAN

address.

6.1.2 WAN

Choose

Status Info >

WAN

and the following page appears.

This page displays the information of the WAN interface, such as the connection

status, and the IP address.

6.1.3 Statistics

6.1.4 LAN

Choose

Status Info >

Statistics

LAN

and the following page appears.

In this page, you can view the statistical information about the recevied and

transmitted data packets of the Ethernet and wireless interfaces.

Click

Reset Statistics

to restore the values to zero and recount them.

Summary of Contents for iB-WVG300N































































































































Search results

Summary of Contents for iB-WVG300N

Reviews:

Related manuals for iB-WVG300N

Brands by name

Popular brands

iBall Baton iB-WVG300N, User Manual

Search results

Summary of Contents for iB-WVG300N

Reviews:

Related manuals for iB-WVG300N

Brands by name

Popular brands