iBall Baton iB-WVG300N User Manual Download Page 53

Page: 53 / 126

VDSL2 Gateway Router

Step4

In this page, it displays the information about the bridge settngs. Click

Apply/Save

to save and apply the settings. You can modify the settings

by clicking the

Back

button if necessary.

6.2.3 3G WAN Setup

Choose

Network Setting

3G WAN Setup

, and the following page appears.

This page is used to configure 3G connection. If you want to access the Internet

through 3G connection, a 3G network card is required. Connect the 3G network card

to the USB interface of the Router.



Information

: Click it to display the information of the 3G network card.



Pin Manage

: Click it to configure the 3G PIN.



Upload Driver

: For a un-support USB dongle, click it to upload the new

driver for supporting the USB. The driver is a text file.

Click

Add

in the

WAN Service For 3G Moblie Setup

to display the following page.

Summary of Contents for iB-WVG300N































































































































Search results

Summary of Contents for iB-WVG300N

Reviews:

Related manuals for iB-WVG300N

Brands by name

Popular brands

iBall Baton iB-WVG300N, User Manual

Search results

Summary of Contents for iB-WVG300N

Reviews:

Related manuals for iB-WVG300N

Brands by name

Popular brands