VDSL2 Gateway Router
96
RADIUS Port:
The port number that the RADIUS server uses. The default
port number is 1812. You may change it according to the server setting.
RADIUS Key:
Set the RADIUS key for accessing the RADIUS server.
WEP Encryption:
You can only select
Enabled
.
Encryption Strength:
You can set 64-bit or 128-bit key.
Current Network Key:
The current key that you use.
Network Key1/2/3/4:
Set the network key. If it is 128-bit key, you need to
enter 13 ASCII characters or 26 hexadecimal digits. For the 64-bit key, you
need to enter 5 ASCII characters or 10 hexadecimal digits.
-
WPA Mode
Select SSID:
Select a SSID for configuring the security settings.
Network Authentication:
Select the WPA-PSK mode.
WPA Group Rekey Interval:
Setting the interval for renewing key.
RADIUS Server IP Address:
Enter the IP address of the RADIUS server.
RADIUS server is used to authenticate the hosts on the wireless network.
RADIUS Port:
The port number that the RADIUS server uses. The default
port number is 1812. You may change it according to the server setting.
RADIUS Key:
Set the RADIUS key for accessing the RADIUS server.
WPA/WAPI Encryption:
You may select AES, or TKIP+AES.
-
WPA-PSK Mode
