iBall Baton iB-WVG300N User Manual Download Page 60

Page: 60 / 126

VDSL2 Gateway Router

In this page, enter the MAC address of the LAN host and the static IP address that

is reserved for the host, and then click the

Apply/Save

button to apply the settings.

Configuring the Second IP Address and Subnet Mask for a LAN
Interface

In the

Local Area Network (LAN) Setup

page, you are allowed to set the second IP

address and the subnet mask for a LAN interface.

After enabling

Configure the second IP Address and Subnet Mask for LAN

interface

, enter an IP address and a subnet mask for the LAN interface.

After finishing setting, click the

Apply/Save

button to apply the settings.

6.2.4.1

IPv6 Auto-configuration

Click

Network Setting > LAN >IPv6 Autoconfig

, and the following page appears.

Summary of Contents for iB-WVG300N































































































































Search results

Summary of Contents for iB-WVG300N

Reviews:

Related manuals for iB-WVG300N

Brands by name

Popular brands

iBall Baton iB-WVG300N, User Manual

Search results

Summary of Contents for iB-WVG300N

Reviews:

Related manuals for iB-WVG300N

Brands by name

Popular brands