iBall Baton iB-WVG300N User Manual Download Page 32

Page: 32 / 126

VDSL2 Gateway Router

6.2.2 WAN Setup

Choose

Network Setting

WAN Setup,

and the following page appears.

In this page, you are allowed to add, remove, or edit a WAN service.

Note:

If VDSL Interface is selected, there are three WAN service types: PPP over

Ethernet (PPPoE), IP over Ethernet, Bridging. And the corresponding

configurations of PTM WAN service are same as the configurations of ATM

WAN service.

6.2.2.1 Adding a PPPoE WAN Service

This section describes the steps for adding the PPPoE WAN service.

Step1

In the

Wide Area Network

(WAN) Service Setup

page, click the

Add

button to display the following page. (At first, you must add a proper ATM

or PTM interface for this WAN service.)

Summary of Contents for iB-WVG300N































































































































Search results

Summary of Contents for iB-WVG300N

Reviews:

Related manuals for iB-WVG300N

Brands by name

Popular brands

iBall Baton iB-WVG300N, User Manual

Search results

Summary of Contents for iB-WVG300N

Reviews:

Related manuals for iB-WVG300N

Brands by name

Popular brands