IAI RCON-LC, Instruction Manual

Page: 78 / 116

Chapter 3 Installation,
iring, Conguration
3.3 Configuration
3-19
ME0416-1A
4. File Menu
There is no difference from RCON System for the file menu.
5. Setting Menu
“ Stations for Display (H)” should be added in the Setting menu.
Refer to 9. Stations for Display
5-1. Special Parameters
The parameters added in RCON-LC System are the two shown below.
Tab/Parameter Selection
[Option Unit Parameter] tab
•
Communication error option unit output status latch
[Inactivate] [Activate]
Select whether to clear the output data on PIO unit side [Inactivate] or to retain it [Activate] when
an error occurred between LC Unit and PIO Unit (including PIO/SIO/SCON Connection Unit).
[LC Operation Setting] tab
•
LC STOP OM domain output status latch
[Inactivate] [Activate]
Select whether to clear the OM Y Domain [bit memory: for output assignment] (refer to 4.1.2)
[Inactivate] or to retain it [Activate] when PLC feature changed to STOP.
Images of each tab in the special parameter window are shown in the following. (6 images)