IAI RCON-LC, Instruction Manual

Page: 21 / 116

Chapter 1 RCON-LC System
1.2 System Configuration
ME0416-1A
1-2
1.2 System Configuration
The following shows the system configuration.
Note1: The following 200V servo-motor actuators cannot be connected to the 200V driver units.
1) Motor types other than those from 60W to 750W
2) Encoder types other than battery-less absolute, incremental, spurious absolute or index absolute type
3) For 3-Phase 200V ·········· Combination that exceeds 2400W for total wattage of actuators connected
to 200V driver unit
4) For Single-Phase 200V ··· Combination that exceeds 1600W for total wattage of actuators connected
to 200V driver unit
5) Servo Press types
6) SCARA Robot
7) CT4 Series
8) ZR Series
When (1) to (4) above, use SCON extension unit and SCON-CB.
Also, DD/DDA and LSA-W21S are not applicable for the single-phase 200V.
Note 2 There is a built-in regenerative resistor of 60W equipped in 200V driver unit and 200V power supply unit.
The regenerative resistor is basically not necessary, but use an external regenerative resistor unit in
case of shortage in regenerative resistor.
By using the calculator software, the quantity of necessary regenerative resistor units can be figured
out.
Teaching tool
Model :TB-02
TB-03
Model : IA-OS
RCM-101-MW
RCM-101-USB
Power supply unit
Model:PSA-24
RCS/ISB/DDA, etc.
SCON-CB-RC
(RCON Connection Type)
PIO/SIO/SCON
Extension Unit
Model:RCON-EXT
-NP/PN
Field network
Fan unit
RCP
RCD
RCA RCL
Simple Absolute Unit
RCP/RCA
Model: RCON-ABU-P (for stepper motor)
Model: RCON-ABU-A (for AC servo motor)
PLC
Connectable actuators
(Note 1)
RCS/ISB/DDA, etc.
+24V
0V
Regenerative Resistor Unit (Note 2)
Model:RESU-2/RESUD-2
3-Phase / Single-Phase
AC200V
PIO Unit
Model : RCON-NP/PN
Model:RCON-FUH
Model:RCON-FU